Usage

This script runs commands and radius checks depending on your configuration set up. Below is a basic breakdown of functions you will need to understand to use the script effectively.

These commands are for authorised members that are set in the Config file. You will only need these for placing and editing the prop locations.

---

/addEV

This Command will open the EV Placement Menu to place the props into your desired locations. The keybindings for the movement can be set in the Config file.

---

/editEV

This Command is used to open the Prop Manager edit menu, it is worth noting this Command will not be needed if you have the autodetection set to true. Once you have Opened this menu you will be able to see the props ID, location & heading, aswell as being able to delete the prop or edit it to a new location.

---

"E"

This Function will be prompted when an authorised vehicle is within the set radius of the Charging location. You will be prompted to open the Charging UI to see the required charge, the time it will take and the cost per KWh of Charge used.

---

Start and Stop Charging

You will see a Start Charging button at the bottom of the UI. You can also Cancel the charge at any point and only get charged for the total charge you have used.

You will not be able to start a charge if you do not have the required funds (unless the fund check has been disabled)